Do you have a problem with a slow flushing toilet? A slow flushing toilet can be frustrating. Some of the factors like clogged siphon jet and clogged flush holes contribute to this problem. In this article, I’m going to show you how to clean toilet siphons and rim jets easily. However, before I take you through the various steps of cleaning your toilet siphons and rim jets, first things first.
What Is A Toilet Siphon?
A toilet siphon jet is a channel that allows water to enter the toilet bowl. The siphon jet then directs water to the trap for a powerful and effective flash. In order to avoid slow flushing toilets in the future, you should learn how to unclog toilet siphons and how to clean the toilet siphon jet.
Also learn How To Clean Floor Grout Without Scrubbing
On the other hand, rim jets are at an angle that ensures water flows to the bowl in a swirling manner. This feature makes cleaning and rinsing the toilet bowl easy. Due to frequent use of toilet siphons and rim jets, they become clogged by components like calcium that are found in water.
If this happens, you should deep clean the toilet siphons and rim jets. You may ask, how can I clean out the flush holes around the rim of my toilet? I will show you how to clean toilet siphons and flush holes step by step. Let’s get right to it.
How to Clean Toilet Siphons
Before you embark on cleaning your toilet siphon, you must assemble tools and materials. Here is a list of tools and materials you need for the job:
- Toilet brush
- L-shaped 3/16” Allen wrench
- Baking soda
- Rubber gloves
First Step: Drain the Toilet
Be sure to wear your cloves before beginning this exercise. Draining the bowl and toilet tank is mandatory because it will ensure vinegar works directly on the clogged toilet siphons and rim jets. To drain the water, flush the toilet and ensure you get rid of as much water as possible. To ensure all the water is used up, open the toilet tank. If there is any water that has remained in the tank, use the sponge to absorb the water and drain it in the bucket.
Second Step: Use Duct Tape to Cover Rim Jets
In order to clean toilet jets with vinegar effectively, you will need to use duct tape to cover the rim jets. The jets are located at the rim of the bowl. Covering the jets with duct tape will prevent the vinegar from flowing down the bowl. The duct tape helps to hold the vinegar in place so that it eats all the minerals that could be clogging the jets. This duct tape trick is a lifesaver!
Third Step: Pour the Vinegar
The minerals that clog toilet siphons and rim jets do not spare the toilet tank. Therefore it is only sensible to clean all the parts including the toilet tank. To ensure the tank is thoroughly cleaned, pour vinegar to cover all the stained areas. After that, go ahead, pour vinegar on the toilet siphons, and rim jets.
Use the funnel to pour vinegar in the overflow tube. Ensure that the vinegar is enough to cover the bottom of the toilet bowl. The toilet siphon will be full of vinegar and the rim jets will not let the vinegar flow because they are covered in duct tape. If the clogging is not severe, let the vinegar sit for an hour or so. However, if your toilet is not in a good shape, leave the vinegar to eat away the minerals overnight.
Also Read: Bathroom Smell Hacks
Toilet siphon cleaning using vinegar is a great and effective way to get rid of clogged siphons and rim jets. Unlike other toilet jet cleaners like muriatic acid, vinegar does not interfere with the toilet parts. Using muriatic acid to clean toilet jets can interfere with some parts that are made of rubber. Toilet jet cleaners like this acid make the tank start to leak and eventually deteriorate.
Fourth Step: Use an Allen Wrench to Clean the Rim Jets
Use the Allen Wrench to clean the clogged rim jets. Since the Allen Wrench is L-shaped, it will be easy to turn it around for 360 degrees cleaning. If you do not have an Allen Wrench, do not worry. A wire that is molded to L-shape works just as fine.
Fifth Step: It’s Time to Flush
When you flush the toilet, the vinegar that was in the tank will flow. Any minerals that were in the toilet siphons will now be washed during the drain. You should pour disinfectant in the toilet while focusing on the stains.
Sixth Step: Add Baking Soda
Use one cup of baking soda for this step. Carefully pour one cup of baking soda to the toilet bowl. A fizzing reaction is likely to occur so you might want to perform this step in a slow manner. Why does fizzing occur? As we all know, vinegar has acidic components while baking soda is alkaline. When the two mix, a fizzing reaction occurs.
Seventh Step: Clean the Tank
Using a hand brush, scrub the inside of the toilet tank in circular motion. Circular movement helps clean all the parts due to overlapping. However, some of the corners cannot be scrubbed using this brush, as it cannot reach the tiny spaces. For the small corners, you can use a toothbrush to clean stubborn stains.
Eighth Step: Clean the Toilet Siphons and Rim Holes
By now, you know how to unclog toilet siphons. After subjecting the toilet siphons to vinegar treatment, it is now time to scrub. Using a toilet brush scrub the toilet rim to remove stubborn stains and calcium deposits that have been missed by the vinegar. Also, look out for hard water stains that could be inside the bowl and scrub them.
Assuming that you still have your gloves on, insert you finger in the siphon jet to inspect if there is calcium left. Flushing the toilet will help push any minerals left down the drain since the vinegar loosened them.
Ninth Step: Results
This final step will determine whether our efforts to unclog the toilet siphon have been fruitful. Fill the tank with water by turning on the water shut off valve. One the tank fills, flush the toilet and observe the speed and power of the flush. If the toilet has improved, then congratulations!
You did a good job.
Toilet Siphons and Rim Jets Maintenance
Why wait until your toilet siphons and rim jets are clogged for you to clean them? Instead, pour some lukewarm vinegar in the overflow tube every occasionally. Alternatively, you can use dish soap. Vinegar and dish soap are quick and effective when it comes to toilet siphons and rim jets cleaning. Using this simple yet effective trick will help you have a powerful flush every time.
Every time you flush your toilet, mineral deposits are left behind. This can lead to build up, which causes clogging. To avoid this, you can pour hot water in the toilet bowl to push down minerals present in the toilet trap. Be careful not to use very hot water because it may crack the toilet bowl. The best advice on how to clean toilet siphons is to use warm soapy water all the time you feel there is a need to drain the contents in the jet.